top of page


The PD6212 Series Precision Directivity loudspeakers are designed for applications requiring high output capability with excellent pattern control. The speakers can be utilized alone in music or speech systems where frequency extension to 80 Hz is adequate or combined with subwoofers to create extended bandwidth full range systems.


  • 300 mm (12 in) horn-loaded LF and largeformat HF driver – high sensitivity design with high continuous 
    SPL capability.
  • Large PT™ Progressive Transition™ waveguides provide broad band pattern control, low distortion at high SPL levels and smooth frequency response.
  • Rotatable low and high frequency waveguide allow either horizontal or vertical cabinet orientation.
  • Sophisticated, steep-slope passive crossover network with switchable bi-amp/passive crossover modes.

JBL PD6212/64 High Sensitivity 2-Way FULL-RANGE Loudspeaker w/Horn Loaded 12" LF

  • Frequency Range 80 Hz to 18 kHz (-10 dB)
      Frequency Response 90 Hz to 16 kHz ( ± 3 dB)
      Coverage Pattern /43: 40° x 30°
    /64: 60° x 40°
    /66: 60° x 60°
    /95: 90° x 50°
      Crossover Modes Bi-amp / Passive switchable
      Passive Crossover 6th order (36 dB/oct) Linkwitz-Riley HP & LP, 850 Hz
      Transducer Power Rating (AES) LF: 400 W (1600 W peak), 2 hrs. 300 W (1200 W peak), 100 hrs
    HF: 75 W (300 W peak), 2 hrs
      Long-Term System Power Rating (IEC) Passive Mode: 300 W (1200 W peak), 100 hrs
      Maximum SPL LF: 137 dB-SPL 
    HF: 135 dB SPL (141 dB peak)
    Passive Mode: 134 dB SPL (140 dB peak)
      System Sensitivity Passive Mode: 109 dB-SPL
      Low Frequency Driver M222-8A 300 mm (12 in) driver with 75 mm (3 in) voice coil
      High Frequency Driver 2453H, 38 mm (1.5 in) exit compression driver with 100 mm (4 in) voice coil
      Nominal Impedance 8 ohms
      Enclosure Trapezoidal with 12.5 degree side angles, 16 mm (5/8 in) exterior
      Suspension Attachment 20 points (5 top, 5 bottom, 4 each side, 2 rear), M10 threaded hardware
      Finish Black DuraFlex™ finish. White (-WH) available upon request.
      Optional Weather Resistant Versions WRC for outdoor placement where the loudspeaker will be sheltered from direct exposure to the elements.
      Grille Powder coated 14 gauge perforated steel, zinc-phosphate dipped, foam
      Input Connectors Neutrik Speakon® NL4, plus CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop through.
      Environmental Specifications: Mil-Std 810; IP-x3 per IEC529.
      Dimensions (H x W x D 
    in vertical orientation)
    991 x 673 x 897 mm
      Net Weight 79.5 kg (175 lb)
      Optional Accessories 229-00009-01 kit of three M10 x 35 mm forged shoulder steel eyebolts.
bottom of page