top of page



The Exterior™ Projection 500 is a powerful fixture for integrating textures, patterns and graphics in outdoor lighting designs. The fixture can be used for bright and dynamic logo projection as well as precision framing.

Using advanced LED technology, it offers outstanding energy efficiency, compact size and unlimited creative possibilities.


  • Flat-field, high-contrast image projection  
  • Fully weatherized for trouble-free use with minimal maintenance in outdoor installations
  • Packed with features, allowing huge creativity in setting up exciting lighting effects


  •     Up to 6100 lumens output with 4 beam angles variants from narrow to wide
  •     Powerful close-range and long-range projection
  •     Flat-field, high-contrast image projection based on high-power LED engine
  •     4 layers of versatile dynamic effects (colors, gobo projection, gobo animation, prisms/frost)
  •     Crisp image projection
  •     Rugged IP66-rated housing
  •     Minimal maintenance – low total cost of ownership


  • Physical

    Length: 415 mm (16.4 in.)
    Width: 293 mm (11.6 in.)
    Height: 444 mm (17.5 in.)
    Weight: 17.5 kg (38.6 lbs.)

    Dynamic Effects

    Color wheel: 8 interchangeable colors + open
    Gobo wheel: 6 rotating gobos plus open, indexing, variable rotation
    Gobo animation: Variable speed linear animation effect
    Prism: Prism wheel with 2 interchangeable prisms, prism rotation and indexing
    Frost (wash effect): Motorized variable
    Focus: Motorized, variable 3 m (9.8 ft.) to infinity
    Dimming: Electronic, constantly variable 0-100%, 16-bit control
    Shutter: Strobe and pulse effects, instant open and blackout

    Control and Programming

    Control options: DMX, RDM, standalone
    Control resolution: 8-bit DMX control of each color Configuration, addressing and status: Onboard control panel with OLED display
    DMX channels: 13
    DMX compliance: USITT DMX512-A
    RDM compliance: ANSI/ESTA E1.20


    Light source: 230 W white light LED engine
    CRI (Color Rendering Index): 72
    Color temperature: 8300K
    LED lifetime: 20,000 hours (to >70% luminous output)*
    LED manufacturer: Prolight Opto

    Photometric Data


    Cut-off angle: 12°
    Total output: 5000 lumens
    Center peak: 203,000 cd


    Cut-off angle: 22°
    Total output: 6100 lumens
    Center peak: 77,000 cd


    Cut-off angle: 36°
    Total output: 5700 lumens
    Center peak: 28,000 cd

    Very Wide:

    Cut-off angle: 50°
    Total output: 3400 lumens
    Center peak: 11,000 cd


    Housing: Cast aluminum
    Finish: Hard anodized, metallic grey lacquered
    Front glass: 5 mm (0.2 in.) anti-reflection coated tempered glass
    Ingress protection: IP66
    Impact resistance: IK08 (with control panel display cover plate installed)
    Corrosion resistance: C5-M (very high corrosivity / marine, ISO 12944)
    EPA (Effective Projected Area): 0.15 m2
    RoHS compliant


    Suitable material: Borosilicate glass, coatings heat-resistant to 450°C (842° F)
    Alternative material: Aluminum 1060, paint on front lens side, 450° C (842° F)
    Gobo diameter: 30.0 mm +0/-0.3 mm (1.2 in. +0/-0.02 in.)
    Maximum image diameter: 23 mm (0.91 in.)
    Glass gobo thickness, minimum: 1.1 mm ±0.1 mm (0.045 ±0.004 in.)
    Glass gobo thickness, maximum: 3.0 mm ±0.3 mm (0.12in. ± 0.012 in.)
    Aluminum gobo thickness: 0.5 mm ± 0.02 mm (0.020 in. ± 001 in.)
    HT paint


    Mounting: Adjustable yoke
    Location: Suitable for wet locations. Do not immerse in water.
    Orientation: Any (sides must be kept vertical)
    Minimum distance to illuminated surfaces: 0.5 m (20 in.)


    Power cable entry: IP68 cable gland
    Power connection: 1.8 m (5.9 ft.) cable tail with bare ends
    Data cable entry: IP68 cable gland
    Data connection: 1.8 m (5.9 ft.) combined input + output cable tail with bare ends


    AC power: 100-240/277 V nominal, 50/60 Hz
    Power Supply: Auto-ranging electronic switch-mode
    Typical half-cycle RMS inrush current: 8.4A
    Surge protection: 4 KV
    Idle power (zero intensity, no effects applied): 32 W, 0.3A

    Typical Power and Current

    110 V, 60 Hz: 320 W, 2.9 A, PF 0.977
    230 V, 50 Hz: 310 W, 1.4 A, PF 0.971
    277 V, 60 Hz: 305 W, 1.2 A, PF 0.950

    Figures are typical, not maximum. Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.


    Cooling: Convection, internal forced air
    Total heat dissipation (calculated): 1100 BTU/hr.
    Maximum surface temperature: 85° C (185° F)
    Maximum ambient temperature (Ta max.): 45° C (113° F) *
    Minimum ambient temperature (Ta min.): -30° C (-22° F)**

    Above this temperature, the fixture regulates output to protect from overheating.
    For instant wake-up with no warm-up mode, leave power applied constantly in ambient temperatures below 0° C (32° F)

bottom of page