top of page

Overview

The VC-Grid is a small, 200 x 200 mm LED video module with a 25 mm pixel pitch. Useful in creating customized LED video solutions with maximum artistic flexibility and a minimum of effort, the VC-Grid’s compact size makes it extremely suitable for integration into stage designs, set elements, creative ceilings, lobbies and much more. Used with or without a front diffuser, multiple VC-Grids can be combined in a countless variety of ways for ultimate design freedom. A combined power/data cable allows VC-Grids to be daisy-chained for easy setup and less cabling.

Features

  • 64 individually controllable pixels
  • 4000 nits of brightness
  • High-quality 16-bit per color image processing technology
  • Pixel-level brightness and color calibration for optimal image quality
  • P3/DMX controllable (automatic protocol detection)
  • Intuitive mapping and addressing via P3 System Controller
  • Combined power/data input (single cable for power and data input)
  • Combined power/data thru (to daisy-chain multiple VC-Grids)
  • Available in RGB, cool white, medium white and warm white
  • Supported by integrated power and data processor (P3 PowerPort 1500) and simple cabling system
  • Custom designs available on request (pixel pitch and module dimensions)

Martin VC-Grid 8x8 25 RGB (sold in multiples of 4) VC-Grid 8x8 25 RGB

$285.23Precio
  • Physical

    ·  Length: 200 mm (7.9 in.) *

    ·  Width: 200 mm (7.9 in.) *

    ·  Height: 18 mm (0.7 in.)

    ·  Weight: 140 g (0.3 lbs.)

    ·  *Including 15 mm board-to-board gap

    Control and Programming

    ·  Control options: Martin P3 System Controller™ via Martin P3 PowerPort 1500™ and/or DMX

    ·  Control modes: Pixel and module

    ·  Control resolution: 16-bit (P3) or 8-bit (DMX) control of each color

    ·  Protocol detection: Automatic

    ·  Setting and addressing: P3 System Controller or RDM-compliant controller

    ·  DMX channels (RGB): 192 (pixel mode) or 3 (module mode)

    ·  Color and intensity calibration: Pixel-level

    ·  Firmware update: Via P3 System Controller

    ·  DMX compliance: USITT DMX512-A

    ·  RDM compliance: ANSI/ESTA E1.20

    Control/User Interface

    ·  Device status: Multi-color visual indication

    ·  Device test and reset: Pushbutton to call up local test patterns and reset device

    Optics

    ·  Minimum LED lifetime: 50,000 hours (to >70% luminous output)*

    ·  *Figure obtained under manufacturer's test conditions.

    Photometric Data

    ·  Pixels: 64 per module

    ·  Viewing angle: 120° x 120°

    ·  Luminous intensity, RGB, calibrated mode: 4000 Nit

    Video Processing

    ·  Brightness control
    Gamma correction and control
    Color temperature control
    Color gamut control
    Calibration processing
    Synchronization

    Construction

    ·  Base: Black FR4 circuit board

    ·  Transparency through module (unmasked area): 37%

    ·  Protection rating: IP20

    ·  RoHS compliant

    Installation

    ·  Mounting: Mounting holes in module

    ·  Orientation: Any

    ·  Maximum number of VC-Grid™ 8x8 25 modules per daisy-chain: 12

    Connections

    ·  Power & data input: 4-pin Molex connector

    ·  Power & data thru: 4-pin Molex connector

    Electrical

    ·  Nominal input voltage: 48 VDC from Martin P3 PowerPort 1500™ or external PSU

    ·  Peak power consumption (at full intensity, full white): 30 W

    ·  Typical power consumption (with typical video content): 10 W

    ·  Figures for typical video content are indicative only and will vary.

    Thermal

    ·  Cooling: Convection

    ·  Maximum ambient temperature (Ta max.): 45° C

    ·  Minimum ambient temperature (Ta min.): -20° C

    ·  Peak heat dissipation (calculated, at full intensity, full white): 105 BTU/hr.

    ·  Typical heat dissipation (calculated, with typical video content): 35 BTU/hr.

    ·  Figures for typical video content are indicative only and will vary.

    Approvals

    ·  EU safety: EN 60950

    ·  EU EMC: EN 55022, EN 55024, EN 61000-3-2, EN 61000-3-3

    ·  US safety: ANSI/UL 60950-1

    ·  Canadian safety: CSA C22.2 No. 60950-1

bottom of page