top of page



The stylish Control 52-WH satellite loudspeaker produces superb high fidelity sound via a low distortion 60 mm (2.5 in) driver, which features a secondary bucking magnet for high efficiency, rubber half roll surround for enhanced bass performance, 19 mm (0.75 in) copper clad aluminum wire voice coil on a vented Nomex® former for high fidelity and reliability, and a copper-capped pole piece for more consistent impedance and extended high frequency response. The wall bracket allows each speaker to be angled up to 45° off-axis.



  • Stylish, unobtrusive design fits into a wide variety of decors
  • Ability to intermix with Control 42C in-ceiling and Control 62P pendant satellite speakers
  • 16 ohms impedance
  • Wall-mount brackets included
  • Available in black or white

JBL CONTROL 52-WH Satellite Speaker, 60 mm (2.5 in) low-distortion driver, White

$86.92 Precio
$67.00Precio de oferta
  • Frequency Range (-10 dB) 140 Hz – 20 kHz
    Frequency Response (±3 dB) 180 Hz – 17 kHz
    Power Capacity 50 Watts Continuous Program Power (2 hrs)
    25 Watts Continuous Pink Noise (2 hrs)
    30 Watts Continuous Program Power (100 hrs)
    15 Watts Continuous Pink Noise (100 hrs)
    Nominal Sensitivity 85 dB (4.0V/1m = 1W)
    82 dB (2.83V, 1m)
    Nominal Coverage Angle 150° x 150° (omnidirectional)
    Rated Maximum SPL (1m) 94 dB average, 100 dB peak
    Nominal Impedance 16 ohms
    Transducer Driver 60 mm (2.5 in) with polypropylene cone, butyl rubber surround, 19 mm (0.75 in) copper-clad coil, vented Nomex® former, secondary bucking magnet, and copper sleeved pole piece for high frequency extension.
    Input Connector Removable locking 2-pin connector with screw-down terminals. 
    Max wire 12 AWG (2.5 mm2)
    Material High impact polystyrene, painted zinc-plated metal grille.
    Dimensions (H x W x D) Cabinet: 115 x 84 x 96 mm (4.5 x 3.3 x 3.75 in)
    Wall bracket: 51 mm (2.0 in)
    Net Weight 0.7 kg (1.5 lbs)
    Shipping Weight 0.8 kg (1.8 lbs)
    Included Accessories Wall bracket (both speaker and wall parts), 2-pin locking connector.
bottom of page