top of page



15 Watt Paging Horn

The Commercial Solutions Series CSS-H15 Paging Horn provides excellent voice range clarity for public address systems, announcement/paging, intercom, security, alarm and industrial applications. Designed for demanding environmental conditions, the CSS-H15 is highly weather resistant (IP-65 rated) so it can be used in either indoor or outdoor applications. The wide coverage pattern allows the horn to cover a larger audience area than is the case with many paging horns.



  • Excellent voice range clarity for announcement and paging.
  • High sensitivity delivers high sound levels with minimal power amplification.
  • Wide 70° horizontal by 90° vertical coverage for medium throw applications.
  • Phenolic diaphragm driver for outdoor durability and high reliability.
  • UL-registered 15-watt multi-tap transformer, with 8 ohm direct bypass.
  • Built-in high-pass filter enhances reliability by protecting against low frequency damage.
  • Highly weather-resistant, with stainless steel bracket and hardware.



  • Public Access Areas
  • Warehouses
  • Factories
  • Schools
  • Recreational Facilities
  • Commercial Buildings
  • Distribution Centers
  • Civic Centers
  • Other Commercial Sound and Protective Signaling Systems

JBL CSS-H15 15 Watt Paging Horn. (Priced as each, 6 in masterpack)

$121.87 Precio
$98.00Precio de oferta
  • Frequency Response (-10 dB) 400 Hz – 7.5 kHz
    Coverage Pattern 70° horizontal by 90° vertical (at 2 kHz and averaged 1 kHz – 4 kHz)
    Included High-Pass Filter Passive 350 Hz high-pass filter built-in to protect against damage from frequencies below operational range.
    Directivity Factor (Q) 10.9 (2 kHz)
    Directivity Index (DI) 10.4 (2 kHz)
    System Power Rating 15 W (60 W peak), 100 hrs
    Sensitivity (1W, 2.83V@ 1m) 105 dB, ave. 1 kHz – 6 kHz; 111 dB at 2 kHz
    Maximum SPL (1m) 117 dB cont ave. (123 dB peak), 1 kHz – 6 kHz;
    123 dB cont ave. (129 dB peak), 2 kHz, 15W input,
    8 ohm setting
    Nominal Impedance 15W/70V, NC/100V tap: 333 ohms
    7.5W/70V, 15W/100V tap: 667 ohms
    3.8W/70V, 7.5W/100V tap: 1333 ohms
    1.9W/70V, 3.8W/100V tap: 2666 ohms
    0.9W/100V, 1.9W/100V tap:5332 ohms
    8 ohms at 8 ohm direct setting
    Transformer Taps 70V: 15W, 7.5W, 3.8W, 1.9W. 0.9W
    100V: 15W, 7.5W, 3.8W, 1.9W
    Full-Range Driver 33 mm (1.3 in) diameter with phenolic diaphragm
    Horn Material ABS
    Mounting Hardware Stainless steel powder-coated U-bracket (yolk) with 3 x 8.8 mm (0.34 in) dia mounting holes, stainless steel exterior hardware.
    Color RAL9016 (horn and bracket)
    Input Connection 300 mm (12 in) pigtail to bare wire; entrance via watertight fitting. Wire colors: red = positive (+); black = negative (-).
    Environmental IP-65 rating per IEC529, salt spray per B117, stainless steel U-bracket and exterior hardware.
    Safety Agency Ratings Transformer UL Registered per UL1876 “Isolating Signal and Feedback Transformers for Use in Electronic Equipment”
    Dimensions (H x W x D) 163 x 222 x 232 mm (6.5 x 8.8 x 9.2 in) horn
    181 x 222 x 232 mm (7.1 x 8.8 x 9.2 in) including mounting bracket. Depth excludes cable exit.
    Weight (ea) 3.0 lb/1.36 kg
    Shipping Weight (ea) 3.7 lb/1.68 kg
    Included Accessories Stainless steel mounting bracket
bottom of page