top of page



30 Watt Paging Horn

The Commercial Solutions Series CSS-H30 Paging Horn provides excellent voice range clarity for public address systems, announcement/paging, intercom, security, alarm and industrial applications. Designed for demanding environmental conditions, the CSS-H30 is highly weather resistant (IP-65 rated) so it can be used in either indoor or outdoor applications. The focused coverage pattern allows the horn to project the sound a farther distance than is the case with wider-coverage paging horns. Typical applications for this product are public access areas, warehouses, factories, schools, recreational facilities, commercial buildings, distribution centers, civic centers, and other commercial sound and protectivesignaling systems.



  • Excellent voice range clarity for announcement and paging.
  • High sensitivity delivers high sound levels with minimal power amplification.
  • Focused 50° horizontal by 70° vertical coverage for long throw capability.
  • Phenolic diaphragm driver for outdoor durability and high reliability.
  • UL-registered 30-watt multi-tap transformer, with 8 ohm direct bypass.
  • Built-in high-pass filter enhances reliability by protecting against low frequency damage.
  • Highly weather-resistant, with stainless steel bracket and hardware.



  • Public Access Areas
  • Warehouses
  • Factories
  • Schools
  • Recreational Facilities
  • Commercial Buildings
  • Distribution Centers
  • Civic Centers
  • Other Commercial Sound and Protective Signaling Systems

JBL CSS-H30 30 Watt Paging Horn (Priced as each, 4 in masterpack)

$166.77 Precio
$133.00Precio de oferta
  • Frequency Response (-10 dB) 380 Hz – 6 kHz
    Coverage Pattern 50° horizontal by 70° vertical (at 2 kHz and averaged 1 kHz – 4 kHz)
    Included High-Pass Filter Passive 350 Hz high-pass filter built-in to protect against damage from frequencies below operational range.
    Directivity Factor (Q) 15.8 (2 kHz)
    Directivity Index (DI) 12 (2 kHz)
    System Power Rating 30 W (120 W peak), 100 hrs.
    Sensitivity (1W, 2.83V@ 1m) 108 dB, ave. 1 kHz – 6 kHz
    112 dB at 1.4 kHz
    Maximum SPL (1m) 123 dB cont ave. (129 dB peak), 1 kHz – 6 kHz; 
    127 dB cont ave. (133 dB peak), 1.4 kHz, 30W input, 
    8 ohm Setting
    Nominal Impedance 30W/70V, NC/100V tap: 167 ohms
    15W/70V, 30W/100V tap: 333 ohms
    7.5W/70V, 15W/100V tap: 667 ohms
    3.8W/70V, 7.5W/100V tap: 1333 ohms
    1.9W/70V, 3.8W/100V tap: 2666 ohms
    8 ohms at 8 ohm direct setting
    Transformer Taps 70V: 30W, 15W, 7.5W, 3.8W, 1.9W
    100V: 30 W, 15W, 7.5W, 3.8W
    Driver 38 mm (1.5 in) diameter with phenolic diaphragm
    Horn Material ABS
    Mounting Hardware Stainless steel powder-coated U-bracket (yolk) with 3 x 10.4 mm (0.41 in) dia mounting holes, stainless steel exterior hardware.
    Color RAL9016 (horn and bracket)
    Input Connection 300 mm (12 in) pigtail to bare wire; entrance via watertight fitting. Wire colors: red = positive (+); black = negative (-).
    Environmental IP-65 rating per IEC529, salt spray per B117, stainless steel U-bracket and exterior hardware.
    Safety Agency Transformer UL Registered per UL1876 “Isolating Signal and Feedback Transformers for Use in Electronic Equipment”
    Dimensions (H x W x D) 206 x 285 x 287 mm (8.2 x 11.2 x 11.3 in) horn
    224 x 285 x 287 mm (8.9 x 11.2 x 11.3 in) including mounting bracket. Depth excludes cable exit.
    Weight (ea) 4.5 lb/2.0 kg
    Shipping Weight (ea) 6.0 lb/2.7 kg
    Included Accessories Stainless steel mounting bracket
bottom of page