top of page



12-inch Woofer; 1.75-inch diaphragm compression driver

75° conical DMT coverage

Maximum SPL 131 dB peak

Also functions as monitor floor wedge

1000-watt Class D power modules in all models (2 × 500 W continuous)


Rugged, texture-painted birch enclosures

Four-position Mic/Line gain (full-range models)

Tour-grade 16 gauge steel grilles

Comfortable ergonomic handles

35 mm pole sockets with Tilt-Direct™

M10 rigging points for suspended installation


$1,687.49 Precio
$1,349.99Precio de oferta
    Configuration 12-inch 2-way multipurpose

    12-inch cone transducer


    1.75-inch diaphragm compression driver
    Frequency Response (-6 dB) 53 Hz to 18 kHz
    Frequency Range (-10 dB) 50 Hz to 20 kHz
    Nominal Coverage (-6 dB) 75° axisymmetric
    Maximum SPL1 131 dB peak
    Power Output2 1000 W Class D (500 W LF + 500 W HF) continuous
    2000 W peak
    Input Impedance Channel A XLR / ¼⁻ᶦⁿᶜʰ: 
    Mic gain setting Balanced Unbalanced
    0 dB 38 kΩ 19 kΩ
    +12 dB 10 kΩ 5 kΩ
    +24 dB 2.66 kΩ 1.33 kΩ
    +36 dB 660Ω 330Ω
    Channel B XLR / ¼⁻ᶦⁿᶜʰ: 38 kΩ balanced / 19 kΩ unbalanced
    Channel B RCA: 10 kΩ
    Controls Power, Gain A, Gain B, Channel A Input Gain (0 dB / 12 dB / 24 dB / 36 dB), LF Mode (Ext Sub/Norm/DEEP™), HF Mode (Flat/Vocal Boost), Front LED (On/Off/Limit)
    Indicators Power, Signal A, Signal B, Standby, Limit, Mic (24 dB and 36 dB settings)
    Connectors Balanced female XLR/¼⁻ᶦⁿᶜʰ line/mic level input, Balanced female XLR/¼⁻ᶦⁿᶜʰ line level input, Dual Balanced male XLR full range line level out , Balanced male XLR "mix" out, Stereo RCA line level input, Remote gain control, Locking IEC power connector
    Cooling On demand, 50 mm variable speed fan
    Amplifier Protection Thermal limiting, output overcurrent, overtemperature muting, GuardRail™
    Transducer Protection Thermal limiting, excursion limiting
    AC Power Input Universal power supply 100–240 VAC, 50 to 60 Hz
    AC Power Consumption
    (1/8 Power)
    100 VAC, 2.3 A
    120 VAC, 2.01 A
    230 VAC, 1.13 A
    Material 15 mm painted birch plywood
    Finish Black textured paint
    Grille Black powder coated 16 gauge steel
    Dimensions (HWD) inches 26 x 15 x 15.4
    Dimensions (HWD) mm 660 × 381 × 391
    Net Weight 49 lb / 22.2 kg
    Available Accessories KW122 suspension kit, KW122 cover, KW M10 kit
bottom of page