Overview
The Martin ERA 150 Wash moving-head LED wash fixture provides class-leading lumen output, high-intensity narrow zoom and full-gamut color calibration for accurate color reproduction and color temperature control, making it an incredibly versatile yet affordable workhorse lighting solution for rentals, installs and touring.
The ERA 150 Wash takes performance even further thanks to a newly designed optical system that produces a wider zoom range, higher output and wide uniform wash field. Other advancements include advanced color-calibration features including extended color mode and a CTC channel that allows RGB color mixing around your desired white point.
Whether lighting a theatre production, live concert, exhibition or corporate event, fill the stage with color and create brilliant, focused beam effects with this flexible moving-head fixture that brings new versatility to the designers' toolbox.
Features
- Light engine: LED 7 x 40W RGBW
- Full-gamut color calibration
- CTC control: 1,800–12,850 K
- High output: 3,700 lm
- High intensity 397,783 cd
- Zoom: 4.2 - 58˚
- Low-noise cooling system
- High-speed pan, tilt & zoom
- Weight 7.3 kg (16.1 lbs.)
- Dimensions: 276 x 176 x 356 mm (10.9 x 7.0 x 14.1 in.)
Martin ERA 150 Wash
Physical
- Length: 276 mm (10.9 in.)
- Width: 176 mm (7.0 in.)
- Height: 356 mm (14.1 in.)
- Weight: 7.3 kg (16.1 lbs.)
Dynamic Effects
- Color mixing: RGBW
- Color presets: 48 color presets, virtual color wheel effects
- Color temperature control: Variable 1,800 - 12,850 KEl
- ectronic dimming: 0 - 100%, four dimming curve options
- Strobe and pulse effects: Variable speed and action, random strobe
- Electronic shutter effect: Instant open and blackout
- Zoom: Motorized, 4.2 - 58°Pan: 540°Tilt: 260°
Construction
- Housing: High-impact flame-retardant thermoplastic
- Color: Black
- Protection rating: IP 20
Installations
- Mounting points: 2 x quarter‐turn fastener receptacles, 106.5 mm
- Location: Indoor use only, must be fastened to surface or structure
- Orientation: Any
- Minimum distance to combustible materials: 0.5 m (1.7 ft.)
- Minimum distance to illuminated surfaces: 1 m (3.3 ft.)
- Minimum clearance around fan and air vents: 0.5 m (1.7 ft.)
Connections
- AC power input/output: Neutrik PowerCON TRUE1 TOP
- DMX and RDM data in/out: Neutrik 5-pin locking XLR
Control and Programming
- Control options: DMX, RDM
- DMX channels: 1816-bit fine control: Dimming, RGB, zoom, pan and tilt
- LED color management modes: Raw, extended and calibrated
- DMX address setting: Control panel with LCD display
- DMX compliance: USITT DMX512-ARDM compliance: ANSI/ESTA E1.20Fixture software update: USB memory device or over DMX link
Optics
- Light source: 7 x 40 W RGBW Osram LEDs
- Minimum LED lifetime: 50,000 hours (to >70% luminous output)*
- Beam angle (half-peak): 4.2° - 38.7°Field angle (one-tenth peak): 5.1° - 58.6°Cutoff angle (3%): 5.7° - 69.6°
- Binning: Tight color and flux binning
- Calibration: Full Gamut Color Calibration
- *Figure obtained under manufacturer's test conditions
Photometric Data
- Wide beam: 3700 lumens
- Narrow beam: 1774 lumens
- Fixture Center Intensity Narrow Beam: 397783 cd
- Fixture Center Intensity Wide beam: 10042 cd
- CRI (Color Rendering Index) : >70CQS (Color Quality Scale): 83
- TM-30 Rf (IES TM-30-15 Fidelity Index): 77
- TM-30 Rg (IES TM-30-15 Gamut Index): 117
- TLCI (Television Lighting Consistency Index): 56CCT: 6500 Kelvin
- LED refresh rate - Standard Mode: 3600 Hz
- LED refresh rate - Theatre Mode: 19200 Hz
Electrical
- AC power: 100-240 V AC nominal, 50/60 Hz
- Power supply unit: Auto-ranging electronic switch mode
- Typical half-cycle RMS inrush current at 240 V, 50 Hz: 8.7 A
- Power Factor: 0.99 @ 100 V / 120 V , 0.97 @ 220 V / 230 V / 240 V
- Typical current draw: 3.8 A @ 100 V / 120 V , 1.5 A @ 220 V / 230 V / 240 V *
Power Consumption
- Typical: 315 W *
- * Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
- Typical: full output white, no effects moving, regulated fan speed.
Thermal
- Cooling: Forced air (temperature regulated, low noise)
- Maximum ambient temperature (Ta max.): 40° C (104° F)
- Minimum ambient temperature (Ta min.): -10° C (14° F)
- Total heat dissipation (calculated): 1195 BTU/hr.
- *Calculated, +/- 10%, at full intensity, full white
- LWR*: 507 lm/kg (230 lm/lb)
- LWR = Lumen-to-Weight Ratio
Environmental
- RoHS: Compliant
- REACH: Compliant
- WEEE: Compliant
- Proposition 65: Compliant
- Efficacy (max output): 15.5 lm/W
Approvals
- Global CB Certification/IECEE: IEC 60598-2-17 (IEC 60598-1)
- EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493
- EU EMC: EN 55015; EN 55032; EN 55035; EN 61000-3-2, EN 61000-3-3, EN 61547
- US safety: UL 1573US EMC: FCC Part 15 Class B
- Canadian safety: CSA C22.2 No. 166Canadian EMC: ICES-003 Class B, ICES-005 Class B
- Australia/NZ: RCM
- United Kingdom: UKCA