Overview
The Exterior PixLine 10 is a linear LED video fixture for media facades and creative installations. The Exterior PixLine 10 can be combined with a wide variety of lenses and diffusers for the right look for every application. The Exterior PixLine 10 is driven by the Martin P3 System Controller family for easy setup and video display, and it is also backwards compatible with DMX. The fixtures can be fully customized in terms of length and color to match every installation requirement, while the power source is hidden.
How processing works for LED video
Features
- 10 mm pixel pitch
- 250 cd per meter calibrated
- 160 lumen per foot calibrated
- High-quality 16-bit per color image processing technology
- Pixel-level brightness and color calibration for optimal image quality
- P3/DMX controllable (automatic protocol detection)
- Intuitive mapping and addressing via P3 System Controller
- Combined power/data input (single cable for power and data input)
- Supported by integrated power and data processor (P3 PowerPort 1500 or P3 PowerPort 1000 IP) and simple cabling system
- Available in standard length of 1280 mm and 320 mm (customized lengths also available)
Martin Ext PixLine 10 RGB 1280mm Rnd Dif Fr Alu
Physical
Length:
Available in 320 mm (12.6 in.) and 1280 mm (50.4 in.) length versions
Width:
27 mm (1.1 in.)
Height:
with flat diffuser / clear front: 32 mm (1.3 in.)
with flat diffuser / clear front in mounting profile: 74 mm (3.0 in.)
with graze (asymmetric wallwasher) lens: 42 mm (1.7 in.)
with asymmetric wallwasher lens in mounting profile: 84 mm (3.4 in.)
with round diffuser: 42 mm (1.7 in.)
with round diffuser in mounting profile: 84 mm (3.4 in.)Weight:
1.2 kg / m (0.9 lbs. per foot)
Custom lengths are available to special order on project basis as follows:Minimum custom length: 300 mm (11.9 in.)
Maximum custom length: 2000 mm (78.8 in.)
Custom length increments: 20 mm (0.8 in.)Control and Programming
-
- Control options: P/N 90721030
- Control modes: RGB, basic, segment and pixel-level
- Control resolution: 16-bit (P3) or 8-bit (DMX) control of each color
- Protocol detection: Automatic
- Setting and addressing: Martin P3™ System Controller or RDM-compliant controller
- DMX channels: 3/10/13/31/55/199
- Color and intensity calibration: Pixel-level
- Firmware update: Via Martin P3™ System Controller
- DMX compliance: USITT DMX512-A
- RDM compliance: ANSI/ESTA E1.20
Optics
-
- Options:
Clear Front: Viewing angle 110°
Flat Diffuser: Viewing angle 160°
Round Diffuser: Viewing angle 260°
Square Diffuser: Viewing angle 300°
Asymmetric graze Lens: Beam angle 25° X 85° - Minimum LED lifetime: 50,000 hours (to >70% luminous output)*
- LED manufacturer: Osram
- *Figure obtained under manufacturer’s test conditions
- Options:
Photometric Data
-
- Color resolution: 16 bits per color (48 bit per pixel)
- Pixels: 100 per meter
- Pitch (pixel center-to-center): 10.00 mm
- Luminous intensity: 250 cd per meter (calibrated mode)
- Total output, calibrated mode: 500 lumens per meter (8,333 nits (modules spaced 30 mm center-to-center))
Video Processing
-
-
Brightness control
Gamma correction and control
Color temperature control
Color space control
Calibration processing
Synchronization
-
Signal Protocol
-
- P3 (via Martin P3™ PowerPort) or DMX
Construction
-
- Color: Alu Grey (customized colors available on project basis)
- Base: Extruded aluminum profile
- Protection rating: IP66
- Impact resistance: IK05
- Corrosion resistance: C5-M (very high corrosivity/marine, ISO 2944)
- RoHS compliant
Installation
-
- Mounting: Slot for locking nuts on back of profile (M6) and/or installation mounting profile
- Orientation: Any
Connections
-
- Power and data input: 6-pin custom (BBD) IP66-rated
- Power and data thru: 6-pin custom (BBD) IP66-rated
- Hot plugging compatible
Electrical
-
- Nominal input voltage: 48 VDC +/- 4%
- Power supply options: Martin P3™ PowerPort 1500, P3™ PowerPort 1000 IP, Martin IP66 PSU or generic 48 VDC PSU
- Maximum total power consumption: 33 W per meter (at max. intensity, full white)
- Surge protection: 4 KV
Thermal
-
- Cooling: Convection
- Maximum ambient temperature (Ta max.): 55° C (131° F)*
- Minimum ambient temperature (Ta min.): -30° C (-22° F)
- Total heat dissipation (calculated, +/- 10%): 115 BTU/hr per meter
- *Above this temperature, the fixture regulates output to protect from overheating (P3 thermal throttling)
Approvals
-
- EU safety: EN 60950-1, EN 60950-22
- EU EMC: EN 55022, EN 55024, EN 61000-3-2, EN 61000-3-3
- US safety: UL 60950-1, UL 60950-22
- US EMC: FCC Part 15 Class A
- Canadian safety: CSA C22.2 No. 60950-1, No. 60950-22
- Canadian EMC: ICES-003 Class A
- Australia/NZ: RCM
-