Overview
Martin by HARMAN Exterior Dot-HP is a bright, outdoor-rated dot designed to create media facades or perimeter lighting on large buildings and structures for long-distance viewing. This high-performance exterior LED dot for large venues allows for long fixture runs with variable pixel pitches for flexible designs. A creative tool for lighting designers, the Exterior Dot-HP is available in two versions – RGB color mixing or cool white – with a number of front designs for a variety of unique looks. It is driven by the Martin P3 System Controller family for easy setup and video display. The Exterior Dot-HP is also compatible with RDM/DMX for smaller setups.
How processing works for LED video
- High-intensity calibrated video dot
- Rugged IP66 housing for permanent outdoor installations
- Easy setup and long cable runs for clean installation
Features
- 100 lumen per dot calibrated
- Available in clear front, diffuser dome and directional lens variants
- RGB or cold white LED engine
- Flexible mounting system allows for customized solutions
- Local integral in-built diagnostics tool
- High-quality 16-bit per color image processing technology
- Pixel-level brightness and color calibration for optimal image quality
- P3/RDM/DMX controllable (automatic protocol detection)
- Intuitive mapping and addressing via P3 System Controller
- Combined power/data input over single cable
- Supported by integrated power and data processor (P3 PowerPort 1500 or P3 PowerPort 1000 IP) and simple cabling system
Martin EXTERIOR DOT-HP,DIFFUSED DOME,RGB,ALU
$424.76Precio
Physical
- Diameter: 72 mm (2.9 in.)
- Height with clear front: 34 mm (1.4 in.)
- Height with dome front: 49 mm (2 in.)
- Height with directional front: 43 mm (1.7 in.)
- Weight, clear front and dome front models: 300 g (0.7 lbs.)
- Weight, directional front models: 350 g (0.8 lbs.)
Control and Programming
- Control options: Martin P3™ System Controller via Martin P3™ PowerPort 1500, Martin P3™ PowerPort 1000 IP and/or RDM/DMX
- Control modes: RGB (RGB variants), white intensity (CW variants), basic
- Control resolution: 16-bit (P3) or 8-bit (DMX) control of each color
- Protocol detection: Automatic
- Setting and addressing: Martin P3™ System controller or RDM-compliant DMX controller
- DMX channels: 3/10
- Calibration: Color and intensity for each Dot
- Firmware update: Via Martin P3™ System Controller
- DMX compliance: USITT DMX512-A
- RDM compliance: ANSI/ESTA E1.20
Control/User Interface
- Device status: Multi-color visual indication
- Device test and reset: Magnetic button to call up fixture status and test fixture
Optics
- Options:
- Clear Front
- Dome Front
- Directional Front (TIR lens)
- LED manufacturer, Exterior Dot-HP RGB: Osram
- LED manufacturer, Exterior Dot-HP CW: Seoul
- Minimum LED lifetime: 50,000 hours (to >70% luminous output)*
- *Figure obtained under manufacturer’s test conditions
Photometric Data
- Color resolution: 16 bits per color (48 bit per pixel)
- Dot pitch: 72 mm - 500 mm (center-to-center)
- Color Temperature:
- Cool white (CW): 6700K±300K
- RGB: 2.000 – 10.000 K (adjustable via P3 or DMX)
- Viewing angle:
- Clear front: 103° x 103° (half-peak)
- Dome front: 125° x 125° (half-peak)
- Directional front: 22° x 22° (half-peak)
- RGB Dots:
Total output, calibrated mode
- Clear front: 90 lumens, 36 cd
- Dome front: 62 lumens, 18 cd
- Directional front: 72 lumens, 270 cd
Total output, non-calibrated mode
- Clear front: 120 lumens, 48 cd
- Dome front: 80 lumens, 24 cd
- Directional front: 96 lumens, 360 cd
- Cool White Dots:
Total output, calibrated mode
- Clear front: 160 lumens, 62 cd
- Dome front: 110 lumens, 32 cd
- Directional front: 120 lumens, 590 cd
Total output, non-calibrated mode
- Clear front: 210 lumens, 82 cd
- Dome front: 142 lumens, 41 cd
- Directional front: 160 lumens, 775 cd
Video Processing
- Brightness control
- Gamma correction and control
- Color temperature control
- Color space control
- Calibration processing
- Synchronization
Signal Protocol
- P3 (via Martin P3™ PowerPort) or RDM/DMX
Construction
- Color: Electrostatic powder-coated (custom colors available by special order) (custom colors available on project basis)
- Base: Cast aluminum
- Protection rating: IP66
- Impact resistance: IK05
- Corrosion resistance: C5-M (very high corrosivity / marine, ISO 12944)
- RoHS compliant
Installation
- Mounting points: Direct surface mount, optional mounting plate or optional mounting profile
- Orientation: Any
Connections
- Power and data input: 6-pin custom (BBD) IP66-rated
- Power and data thru: 6-pin custom (BBD) IP66-rated
- Hot-pluggable
Electrical
- Nominal input voltage: 48 VDC +/- 4%
- Power supply options: Martin P3™ PowerPort 1500, P3™ PowerPort 1000 IP, Martin™ IP66 PSU or generic 48 VDC PSU
- Typical total power consumption, calibrated mode: 5 W at full intensity, full white
- Typical total power consumption, uncalibrated mode: 7 W at full intensity, full white
- Surge protection: 4 KV
Thermal
- Cooling: Convection
- Maximum ambient temperature (Ta max.): 55° C (131° F)
- Minimum ambient temperature (Ta min.): -20° C (-4° F)
- Total heat dissipation (calculated, +/- 10%): 20 BTU/hr.
Approvals
- EU safety: EN 60950-1, EN 60950-22
- EU EMC: EN 55024, EN 55032 (Class A), EN 61000-3-2, EN 61000-3-3
- US safety: UL 60950-1, UL 60950-22
- US EMC: FCC Part 15 Class A
- Canadian safety: CSA C22.2 No. 60950-1, No. 60950-22
- Canadian EMC: ICES-003 Class A
- Australia/NZ: RCM