top of page

Overview

 

Exterior™ Wash 100 is a powerful, compact and energy-efficient LED lighting fixture designed to illuminate smaller structures, features of a building and landscaping. A discreet, optional snoot integrates seamlessly with the slick design of the fixtures. It has built-in display for ease-of-use, a wide selection of beam angles and is fully IP-rated for permanent outdoor use.

The Exterior Wash 100 is designed for narrow beam applications and is based on separate LEDs for red, green, blue and white

 

  • Narrow beam configuration with 6 beam angle options
  • Functional and discreet optional snoot which integrates with the design of the fixtures
  • Control via DMX, RDM and OLED display

 

Features

 

  • Powerful Single-color R,G,B,W LEDs
  • Up to 1800 lumens at full white (RGBW)
  • Six different beam angle options
  • Internal power and control (DMX, RDM and OLED display)
  • Rugged IP66 housing
  • 0–100% intensity control

Martin Pro EXTERIOR WASH 100,7°,EU,ALU

$1,216.24Precio
  • Physical

    • Length: 240 mm (9.5 in.)
    • Width: 198 mm (7.8 in.)
    • Height: 257 mm (10.2 in.)
    • Weight: 5.0 kg (11.1 lbs.)

    Dynamic Effects

    • Color mixing: RGBW
    • Intensity: 0 - 100%

    Control and Programming

    • Control systems: DMX, RDM
    • Setting, addressing, standalone programming: Control panel with OLED display
    • DMX channels: 3-5 depending on DMX mode
    • Receiver: RS-485
    • Firmware update: Serial upload via DMX link
    • DMX compliance: USITT DMX512-A
    • RDM compliance: ANSI/ESTA E1.20

    Optics

    • Light source: 4 x R, 5 x G, 4 x B, 5 x W single-color LEDs
    • Minimum LED lifetime: 50,000 hours (to >70% luminous output)*
    • LED manufacturer: Cree
    • Beam Angle Options:

    No diffuser: 7.5°
    Narrow diffuser: 11.5°
    Medium diffuser: 22°
    Wide diffuser: 50°
    Very wide diffuser: 60°
    Asymmetric diffuser: 61° x 15°

    • *Figure obtained under manufacturer's test conditions

    Construction

    • Housing: Cast aluminum
    • Color: Light grey (white, black or other colors available on request)
    • Ingress protection rating: IP66
    • Surface treatment: Anodized and electrostatic powder-coated
    • Effective Projected Area (EPA): 0.05 m² including snoot
    • Impact resistance: IK08 (with display panel cover plate installed)
    • Corrosion resistance: C5-M (very high corrosivity / marine, ISO 12944)
    • RoHS compliant

    Installation

    • Mounting: Adjustable yoke
    • Orientation: Any
    • Minimum distance to illuminated surfaces: 0.2 m (0.6 ft.)

    Connections

    • Power connection: 1.8 m (5.9 ft.) cable tail without connector
    • Power input cable type, EU models: H05RN-F 300/500V, 3 x 0.75 mm2, Ø 7 mm
    • Power input cable type, US models: SJOW 18AWG, 300V, WL F1, Ø 8 mm
    • Data connection: 1.8 m (5.9 ft.) open ended 5-conductor combined input + output cable tail
    • All cable entries: IP68 cable gland

    Electrical

    • AC power: 100 - 240 / 277 V nominal, 50/60 Hz
    • Power supply unit: Integrated, auto-sensing multi-voltage
    • Power Consumption: 5 W (steady state, all LEDs at zero intensity)
    • Typical half-cycle RMS inrush current: 9.7 A
    • Maximum total power consumption: 50 W
    • Surge protection: 4 KV

    Typical Power and Current

    • 100 V, 60 Hz: 0.45 A, 42 W, PF 0.99
    • 120 V, 60 Hz: 0.35 A, 42 W, PF 0.99
    • 230 V, 50 Hz: 0.2 A, 42 W, PF 0.93
    • 277 V, 60 Hz: 0.2 A, 42 W, PF 0.85
    • Measurements made with fixture in steady state at nominal voltage, ambient temperature (Ta) 20° C (68° F), all LEDs at full intensity. Allow for a deviation of +/- 10%.

    Thermal

    • Cooling: Convection
    • Maximum ambient temperature (Ta max.): 45° C (113° F)*
    • Minimum ambient temperature (Ta min.): -30° C (-22° F)**
    • Maximum surface temperature, steady state, at 40° C ambient: 70° C (158° F)
    • Total heat dissipation (calculated, +/- 10%): 160 BTU/hr
    • *Above this temperature, the fixture regulates output to protect from overheating
      **Power must be maintained below -20° C (-4° F)
bottom of page