top of page
Martin EXTERIOR WASH 310,10°,EU,ALU
Overview
 
Exterior Wash™ 310 is a powerful, compact and energy-efficient LED lighting fixture designed to illuminate large structures, building facades and bridges. A discreet, optional snoot integrates seamlessly with the slick design of the fixtures. It has built-in display for ease-of-use, a wide selection of beam angles and is fully IP-rated for permanent outdoor use.
 
The Exterior Wash 310 is designed for superior color mixing applications and is based on quad-color premixed LEDs.
 
  • Uniform color mixing with 6 beam angle options
  • Functional and discreet optional snoot which integrates with the design of the fixtures
  • Control via DMX, RDM and OLED display
 
Features
  • Powerful premixed LEDs
  • Up to 8300 lumens at full white (RGBW)
  • Six different beam angle options
  • Internal power and control (DMX, RDM and OLED display)
  • Rugged IP66 housing
  • 0 – 100% intensity control

Martin EXTERIOR WASH 310,10°,EU,ALU

$4,864.97Precio
    • Physical
      • Length: 283 mm (11.2 in.)
      • Width: 404 mm (15.9 in.)
      • Height: 439 mm (17.3 in.)
      • Weight: 19.0 kg (42.0 lbs.)
    • Dynamic Effects
      • Color mixing: RGBW
      • Intensity: 0 - 100%
    • Control and Programming
      • Control systems: DMX, RDM
      • Setting, addressing, standalone programming: Control panel with OLED display
      • DMX channels: 3-5 depending DMX mode
      • Receiver: RS-485
      • Firmware update: Serial upload via DMX link
      • DMX compliance: USITT DMX512-A
    • Optics
      • Light source: 30 x RGBW quad-color LEDs
      • Minimum LED lifetime: 50,000 hours (to >70% luminous output)*
      • LED manufacturer: Cree
      • Beam Angle Options:
        • No diffuser: 11°
        • Narrow diffuser: 13°
        • Medium diffuser: 27°
        • Wide diffuser: 43°
        • Very wide diffuser: 62°
        • Asymmetric diffuser: 66° x 15°
      • *Figure obtained under manufacturer's test conditions
    • Photometric Data
      • Total luminous output: 8300 lumens
    • Construction
      • Housing: Cast aluminum
      • Color: Light grey (white, black or other colors available on request)
      • Ingress protection rating: IP66
      • Surface treatment: Anodized and electrostatic powder-coated
      • Effective Projected Area (EPA): 0.14 m² including snoot
      • Impact resistance: IK08 (with control panel display cover plate installed)
      • Corrosion resistance: C5-M (very high corrosivity / marine, ISO 12944)
      • RoHS compliant
    • Installation
      • Mounting: Adjustable yoke
      • Orientation: Any
      • Minimum distance to illuminated surfaces: 0.2 m (0.6 ft.)
    • Connections
      • Power connection: 1.8 m (5.9 ft.) cable tail without connector
      • Power input cable type, EU models: H05RN-F 300/500V, 3 x 0.75 mm2, Ø 7 mm
      • Power input cable type, US models: SJOW 18AWG, 300V, WL F1, Ø 8 mm
      • Data connection: 1.8 m (5.9 ft.) open ended 5-conductor combined input + output cable tail
      • All cable entries: IP68 cable gland
    • Electrical
      • AC power: 100 - 240 / 277 V nominal, 50/60 Hz
      • Power supply unit: Integrated, auto-sensing multi-voltage
      • Power Consumption: 7 W (steady state, all LEDs at zero intensity)
      • Typical half-cycle RMS inrush current: 10.9 A
      • Maximum total power consumption: 300 W
      • Surge protection: 4 KV
    • Typical Power and Current
      • 100 V, 60 Hz: 2.7 A, 270 W, PF 0.99
      • 120 V, 60 Hz: 2.3 A, 265 W, PF 0.99
      • 230 V, 50 Hz: 1.2 A, 260 W, PF 0.98
      • 277 V, 60 Hz: 1.0 A, 260 W, PF 0.95
      • Measurements made with fixture in steady state at nominal voltage, ambient temperature (Ta) 20° C (68° F), all LEDs at full intensity. Allow for a deviation of +/- 10%.
    • Thermal
      • Cooling: Convection
      • Maximum ambient temperature (Ta max.): 45° C (113° F)*
      • Minimum ambient temperature (Ta min.): -30° C (-22° F)**
      • Maximum surface temperature, steady state, at 40° C ambient: 70° C (158° F)
      • Total heat dissipation (calculated, +/- 10%): 945 BTU/hr
      • *Above this temperature, the fixture regulates output to protect from overheating
        **Power must be maintained below -20° C (-4° F)
bottom of page