top of page

Overview

Designed to produce rich color and premium white light in a wide variety of applications where light quality is critical, the MAC Encore™ Wash CLD is an LED-based alternative to the MAC Viper Wash DX. The feature-packed soft edge moving head offers unparalleled 6000 K crisp, neutral daylight, and doubles as a modern replacement for generic fixtures like HMI based Fresnel fixtures, with the additional benefit of color mixing and movement.

  • Unparalleled 6000 K cold white light quality
  • Super silent cooling and effects operation
  • Best-in-class size/weight/performance ratio

Features

  • Pure white LED engine with 6000 K CCT.
  • No color temperature variation during zoom and dimming.
  • Flicker-free operation—LED driver frequency suitable for all camera applications.
  • Whisper-silent—Combines convection and forced air cooling with user-selectable output vs. sound level control.
  • Fully electronic dimmer/shutter control with various dimming curves and tungsten red-shift emulation.
  • Vibrant CMY color mixing with a superior palette of colors ranging from rich, saturated primary colors to light and smooth pastel shades.
  • Variable CTO—daylight to tungsten CCT control and expansion of the CMY palette that stays true to the black body curve.
  • Color wheel—6 interchangeable dichroic filters + open.
  • Fresnel lens: 1:4 zoom—precise, silent and fast zoom.
  • PC lens (optional): 1:5 zoom—precise, silent and fast zoom.
  • Internal barndoor system with two shutter blades and iris. Shutter blades can overlap for full blackout and the entire system rotates +/- 100°. Repeats cues with great precision.
  • Precise and tight iris with adjustable dynamic effects.
  • Animotion™ FX System—Internal dimming effect macros for stunning 3D mid-air and projection effects.
  • Super precise and silent pan/tilt movement and positioning due to 3-phase stepper motor technology and absolute position monitoring.
  • Compact size—L: 452 x W: 480 x H: 745 mm / L: 17.8 x W: 18.9 x H: 29.3 in.
  • Low weight—28.5 kg/62.9 lbs
  • Foam rubber (SIP) flight case insert for secure shipment. 

Martin MAC ENCORE WASH,CLD,EPS,WHITE

$12,532.85Precio
  • Physical

    Length:

    452 mm (17.8 in.)


    Width:

    480 mm (18.9 in.) across yoke

    Height:

    755 mm (29.8 in.) maximum
    745 mm (29.4 in.) head straight up

    Weight:

    28.5 kg (62.9 lb.)
    Minimum center-to-center distance in side-by-side installation: 730 mm (28.8 in.)

     

    Dynamic Effects

      • Pre-programmed effects: Two ranges of FX, independent or synchronized/combined
      • Color mixing: CMY, independently variable 0 - 100%
      • Color temperature control: Variable 6000 - 2700 K
      • Color wheel: 6 x interchangeable dichroic filters + open, indexing, continuous rotation, random color
      • Barn doors: Internal, two blades with individually controllable insertion, +/- 100° module rotation
      • Iris: Variable 0 - 100%
      • Dimmer/shutter: 0 - 100% continuous dimming, regular and random strobe and pulse effects, instant open and blackout
      • Dimming options: Choice of four dimming curves
      • Zoom: Motorized
      • Focus: Range varies with zoom angle, from approx. 2 m (6.6 ft.) / 6 m (19.7 ft.) to infinity
      • Pan: 540°
      • Tilt: 268°
      • Position correction system: Absolute position monitoring

    Control and Programming

      • 16-bit control: Dimming, pan and tilt
      • Movement control options: Tracking and vector
      • Setting and addressing: Control panel with backlit graphic display and jog wheel or via DMX
      • DMX channels: 24
      • Fixture Identification: User-settable ID number
      • DMX compliance: USITT DMX512-A
      • RDM compliance: ANSI/ESTA E1.20
      • Transceiver: Opto-isolated RS-485
      • Fixture software update: USB memory device or over DMX link

    Optics

      • Light source: 6000 K white LEDs
      • CRI (Color Rendering Index): >80
      • Total LED engine power: 468 W
      • Minimum LED lifetime: 50,000 hours (to >80% luminous output)*
      • Zoom range with Fresnel lens (standard): 14° - 60° one-tenth peak (1:4)
      • Zoom range with PC lens (optional): 11° - 58° one-tenth peak (1:5)
      • *Figure obtained under manufacturer's test conditions

    Photometric Data

      • Light engine luminous output: ≥ 39,400 lumens
      • Fixture luminous output with Fresnel lens (standard): 11,000 lumens
      • Fixture luminous output with PC lens (optional): 12,000 lumens
      • CQS (Color Quality Scale): >80
      • TM-30 Rf (IES TM-30-15 Fidelity Index): >80
      • TM-30 Rg (IES TM-30-15 Gamut Index): >96
      • TLCI (Television Lighting Consistency Index): >70

    Construction

      • Housing: High-impact flame-retardant thermoplastic
      • Color: Black
      • Protection rating: IP20

    Installation

      • Mounting points: 4 pairs of 1/4-turn locks
      • Location: Dry location only, must be fastened to surface or structure
      • Orientation: Any
      • Minimum distance to combustible materials: 0.2 m (8 in.)
      • Minimum distance to illuminated surfaces: 2.0 m (6.6 ft.)

    Connections

      • AC power input: Neutrik TRUE1 socket (accepts Neutrik TRUE1 NAC3FX-W connector)
      • DMX and RDM data in/out: 5-pin locking XLR

    Electrical

      • AC power: 120-240 V nominal, 50/60 Hz
      • Power supply unit: Auto-ranging electronic switch-mode
      • Power Consumption: 64 W
      • Half-cycle RMS inrush current at 230 V, 50 Hz: 10.3 A

    Typical Power and Current

      • 120 V, 60 Hz: 5.0 A, 596 W, PF 0.998
      • 208 V, 60 Hz: 2.9 A, 581 W, PF 0.988
      • 230 V, 50 Hz: 2.6 A, 580 W, PF 0.981
      • 240 V, 50 Hz: 2.2 A, 585 W, PF 0.979
      • Figures are typical, not maximum. Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%. PF = power factor

    Thermal

      • Cooling: Combined convection and forced air (temperature-regulated, low noise, user-definable levels)
      • Maximum ambient temperature (Ta max.): 40° C (104° F)
      • Minimum ambient temperature (Ta min.): 5° C (41° F)
      • Maximum surface temperature, steady state, at 40° C ambient: 75° C (167° F)
      • Total heat dissipation (calculated, +/- 10%): 2000 BTU/hr.

    Approvals

      • EU safety: EN 60598-2-17, EN 62471, EN62493
      • EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-11, EN 61547
      • US safety: UL 1573
      • US EMC: FCC Part 15 Class A
      • Canadian safety: CSA C22.2 No. E598-2-17
      • Canadian EMC: ICES-003 Class A
      • Australia/NZ: RCM

    Included Items

      • Two omega brackets with 1/4 turn fasteners for rigging clamp attachment

    Accessories

      • Gelframe MAC Encore: P/N 91001000
      • Set of Followspot Handles MAC Encore: P/N 91001001HU
      • PC Lens Assy MAC Encore Wash: P/N 91616110HU
      • SIP Packaging MAC Encore Family: P/N 91616115HU
      • PC (planoconvex) Lens for MAC Encore Wash: P/N TBA
      • Cables and connectors:

        Power Input Cable, H07RN-F, 2.5 mm2, bare ends to Neutrik TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91611797
        Power Input Cable, H07RN-F, 2.5 mm2, bare ends to Neutrik TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91611786
        Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91610173
        Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91610174
        Cable Connector, Neutrik PowerCON TRUE1 NAC3FX-W (female): P/N 91611789

      • Installation hardware:

        G-clamp (suspension with fixture hanging vertically downwards only): P/N 91602003
        Quick Trigger Clamp (suspension with fixture hanging vertically downwards only): P/N 91602007
        Half-coupler Clamp: P/N 91602005
        Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006
        Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007

      • Flightcase: Two-unit Flightcase for MAC Encore™*: P/N 91515048
      • *Please order SIP variant fixtures to obtain the required SIP foam flightcase inserts
bottom of page