top of page

Overview

This extremely bright LED profile fixture combines top-quality white light with a fast, smooth CMY color mixing system and crisp gobo projection on surfaces as well as mid-air.

With all this and the new Animotion™ FX system that allows never-before seen beam animations, the market is now finally seeing the first real 700/800 W discharge lamp replacement in a profile fixture that effectively harnesses cutting-edge LED technology.

  • First real alternative to a 700/800 watt HID fixture
  • Flat field, crisp image, high contrast
  • Full feature set including CMY color mixing and 1:3 zoom

Features

  • First real alternative to a 700/800 watt HID fixture
  • Flat field, crisp image, high contrast
  • Full feature set including CMY color mixing and 1:3 zoom
  • Very low weight and compact design
  • Super high-speed movements and effects
  • Consistent photometric performance via latest LED technology

Martin MAC Quantum Profile in cardboard

$9,260.73Precio
  • Physical

    Length: 452 mm (17.8 in.)
    Width: 431 mm (17.0 in.) across yoke
    Height:

    642 mm (25.3 in.) head straight up
    648 mm (25.5 in.) maximum

    Weight: 23.2 kg (51.1 lbs.)

    Dynamic Effects

    Electronic dimming: Four dimming curve options
    Color mixing: CMY, independently variable 0 - 100%
    Color wheel: 6 color filters plus open
    Beam effects: Rotating three-facet prism
    Rotating gobo wheel: 6 interchangeable gobos plus open, wheel rotation, gobo rotation, indexing and shake
    Static gobo wheel: 10 gobos plus open, wheel indexing, rotation and shake
    Shutter effect: Electronic, with variable speed regular and random strobe
    Iris: 0 - 100%, pulse effects
    Zoom: Motorized
    Focus: Motorized, with zoom-focus tracking
    Pan: 540°
    Tilt: 268°
    Pan and tilt speed: Adjustable via onboard control panel and DMX

    Control and Programming

    Control systems: DMX
    RDM: Implemented
    Control resolution: 8-bit, with 16-bit control of dimming, gobo indexing, zoom, focus, pan and tilt
    Setting and addressing: Control panel with backlit graphic display
    DMX channels: 19/27
    DMX compliance: USITT DMX512-A
    RDM compliance: ANSI/ESTA E1.20
    Transceiver: RS-485
    Fixture software update: Direct using USB memory stick or via DMX link using Martin USB Duo™ DMX Interface Box

    Optics

    Zoom range: 12° - 36° (1:3)
    Light source: 475 W LED engine
    LED refresh rate: 3000 Hz
    Minimum LED lifetime: 50,000 hours (to >70% luminous output)*
    Output: 12,700 lumens
    *Figure obtained under manufacturer´s test conditions

    Construction

    Housing: High-impact flame-retardant thermoplastic
    Color: Black
    Protection rating: IP20

    Installation

    Mounting points: 4 pairs of quarter-turn locks
    Location: Indoor use only, must be fastened to surface or structure
    Orientation: Any
    Minimum distance to combustible materials: 0.2 m
    Minimum distance to illuminated surfaces: 2.0 m

    Connections

    AC power input: Neutrik PowerCon
    DMX and RDM data in/out: 5-pin locking XLR

    Electrical

    AC power: 120-240 V nominal, 50/60 Hz
    Power supply unit: Auto-ranging electronic switch mode
    Typical half-cycle RMS inrush current: 10.3 A
    Maximum total power consumption: 750 W
    Typical power consumption, all effects static, zero light output: Approx. 50 W

    Typical Power and Current

    120 V, 60 Hz: 4.8 A, 576 W, PF 0.999
    208 V, 60 Hz: 2.8 A, 568 W, PF 0.991
    230 V, 50 Hz: 2.5 A, 565 W, PF 0.988
    240 V, 50 Hz: 2.4 A, 565 W, PF 0.988
    Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.

    Thermal

    Cooling: Forced air (temperature-regulated, low noise, user-definable levels)
    Maximum ambient temperature (Ta max.): 40° C
    Minimum ambient temperature (Ta min.): 5° C
    Total heat dissipation (calculated, +/- 10%): 2000 BTU/hr.

    Approvals

    EU safety: EN 60598-2-17 (EN 60598-1), EN 62471
    EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547
    US safety: UL 1573
    US EMC: FCC Part 15 Class A
    Canadian safety: CSA C22.2 No. E598-2-17 (CSA E60598-1)
    Canadian EMC: ICES-003 Class A
    Australia/NZ: C-TICK N4241

    Included Items

    Two omega brackets for rigging clamp attachment: P/N 91602001

    Accessories

    3 m power cable, 12 AWG, SJT, with PowerCon NAC3FCA power input connector: P/N 11541503
    G-clamp: P/N 91602003
    Quick trigger clamp: P/N 91602007
    Half-coupler clamp: P/N 91602005
    Neutrik PowerCon NAC3FCA power input connector, cable mount, blue: P/N 05342804
    Flightcase for 2 x MAC Quantum™: P/N 91510210

bottom of page